Home > Push Button Panel >

5WG1223-2DB13 KNX Pushbutton Triple With Status LED Titanium White i-System UP 223/13

Product Categories

Building Controllers [11]
Switch Actuator [135]
Dimming Actuator [52]
VAV Controllers [6]
System Components [81]
DALI Gateway [48]
Guest Room Control [4]
Binary Input [32]
Room Sensors [21]
Fan Coil Controllers [21]
Special Sensor [31]
Energy Meter [5]
Room Temperature Control Unit [62]
Presence Detector [46]
Movement Detector [12]
Display Devices [19]
Push Button Panel [243]
Software Devices [14]
Building Automation Components [200]

Maituo Intelligent Technology Co.，Ltd

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

5WG1223-2DB13 KNX Pushbutton Triple With Status LED Titanium White i-System UP 223/13

Certification : CE RoHS

Protection : Electrical isolation between segments

Model Number : 5WG1223-2DB13

Number Of Channels : 1 or 2 channels

Payment Terms : T/T,Western Union

Installation Type : Wall-mounted or embedded

Packaging Details : Carton

Communication Protocols : Wi-Fi, Zigbee, Z-Wave, or RF

Delivery Time : 7 Days

Communication Protocol : KNX / Modbus / ZigBee (depending on model)

Place of Origin : EU

Controlmethod : Electrical and Manual Override

MOQ : 5

Power Supply Mode : KNX bus power supply (DC 24V)

Contact Now

5WG1223-2DB13 KNX Pushbutton Triple With Status LED Titanium White i-System UP 223/13

Product Overview

The 5WG1223-2DB13 (UP 223/13) is a KNX triple pushbutton panel in titanium white with status LEDs across all three rocker pairs, providing simultaneous visual feedback for three independent KNX channels at a glance.

Three horizontal rockers give full control of three separate building functions while the LEDs indicate each load's current status and provide orientation lighting. The panel connects via PEI to a KNX BTM bus coupling unit and is fully configured using ETS software. LED behaviour – active high, active low, or orientation-only – is programmable per channel for maximum flexibility.

Technical Specifications

Protocol	KNX / EIB Twisted Pair (TP)
Bus supply	SELV DC 24 V (from KNX bus via BTM coupling unit)
Number of buttons	3 pairs of rockers (6 surfaces, triple gang)
Status LED	Yes – per rocker pair (3 LEDs total), orientation / status function
KNX channels	3 independent channels
Connection	Physical External Interface (PEI) to bus coupling unit BTM
Functions per channel	Switching ON/OFF/Toggle, Dimming, Shutter/Blind, Value sending, Scene (1-bit)
Labelling field	Yes – label strip
Dimensions (W x H x D)	55 x 55 x 11 mm
Mounting	Flush-mounted, compatible with EN 60670 back boxes
Operating temperature	-5 °C to +45 °C
Protection class	IP 20
Colour / Finish	Titanium white
Design line	DELTA i-system
ETS compatibility	ETS 3 / ETS 4 / ETS 5 / ETS 6
Certifications	KNX certified, CE, RoHS compliant

Applications

The UP 223/13 is the preferred panel for comprehensive room entry control where users need to see the state of multiple loads before touching any button. Hotel room master panels benefit greatly: guests can instantly see whether the ceiling light, reading light, and black-out blinds are active, and adjust accordingly.

In commercial offices, the three-channel LED panel serves as a zone status board – lighting zone A, lighting zone B, and projector screen – all visible and controllable from the meeting room door. The orientation LEDs also support fire evacuation scenarios by remaining lit even when other loads are off.

5WG1223-2DB13 KNX Pushbutton Triple With Status LED Titanium White i-System UP 223/13 Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Maituo Intelligent Technology Co.，Ltd
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!