QAP1030.200 Cable Temperature Sensor PVC 2m NTC 10k
The QAP1030.200 is a cable-mounted NTC 10k temperature sensor with a 2-metre PVC-insulated lead for wired connection to the analog input of AQR2570 series KNX room sensor base modules. The NTC (Negative Temperature Coefficient) thermistor element provides resistance-based temperature measurement processed by the base module for closed-loop room, floor, or duct climate control via KNX.
Flexible Installation
The 2-metre cable enables flexible sensor positioning at the optimal measurement point — at floor level for underfloor heating feedback, near the ceiling for air stratification compensation, inside ventilation ductwork, behind furniture, or wherever a panel front module sensor would be impractical. The PVC cable jacket provides adequate mechanical protection for standard indoor environments.
Technical Specifications
| Data Sheet |
N1831 |
| Sensing Element |
NTC thermistor, 10k ohm nominal (at 25°C) |
| Cable Type |
PVC-insulated flexible cable |
| Cable Length |
2 metres |
| Operating Range |
0...50°C |
| Stock Number |
BPZ:QAP1030.200 |
| Compatible Base Module |
AQR2570 series (NTC 10k passive analog input) |
| Connection |
Direct wiring to base module analog input terminals |
| Warranty |
60 months |
Key Features
- NTC 10k thermistor for accurate temperature measurement
- 2-meter PVC cable for flexible placement
- Direct connection to KNX room sensor base modules
- Suitable for various climate control applications
- 5-year warranty for long-term reliability
Applications
Applications include floor temperature sensing for underfloor heating, duct temperature monitoring for air handling units, surface sensing of radiant panels or chilled ceilings, and room temperature measurement in installations using a blank AQR2530NNW front panel. Well suited to hospitality, residential, and commercial projects where discreet and flexible sensor placement improves comfort control and system performance.
